1 / 5
Bonevia
Bonevia
| Description | Qty. | Description | Qty. |
|---|---|---|---|
| Hexagonal Solid Screwdriver | 1 | Guide Wire, Ø3.2×400mm | 5 |
| Insertion Handle | 1 | Depth Gauge For Guide Wire, Ø3.2mm | 1 |
| Distal Aiming Connecting Shaft | 1 | Cannulated Drill Bit For Cortex Bone, Ø10.6/Ø3.2mm | 1 |
| Buttress Nut For Proximal Aiming Arm | 2 | Cannulated Drill Bit With Limit, Ø10.6/Ø3.2mm | 1 |
| Protection Sleeve For Distal Locking | 2 | Fixation Sleeve, SW4.5/Ø3.2mm | 1 |
| Obturator For Distal Locking | 2 | Screwdriver For Pfn Blade | 1 |
| Trocar For Distal Locking | 1 | Extractor Connection Shaft For Blade | 1 |
| Compression Nut | 1 | Counter-Torque Wrench For Blade | 1 |
| Protection Sleeve For Blade | 1 | Drill Bit, Ø4.3mm | 3 |
| Protection Sleeve For Lag Screw | 1 | Pin Wrench, SW3/SW5 | 1 |
| Obturator For Blade | 1 | Depth Gauge For Locking Screw | 1 |
| Obturator For Lag Screw | 1 | Screwdriver,Hexagonal, SW3.5 | 1 |
| Protection Sleeve For Lag Screw | 1 | Wrench With T-Handle | 1 |
| Trocar | 1 | Extractor For Nail, M8 | 1 |
| Connecting Nut | 1 | Guide Wire With Hook, Ø2.8mm | 1 |
| Aiming Arm For Distal Locking | 1 | Cannulated Screwdriver For End Cap, Ø2.8/SW4/SW11 | 1 |
| Universal Chunk With T-Handle | 1 | Cannulated Wrench For End Cap, SW11 | 1 |
| Radiographic Ruler | 1 | Extractor For Blade, SW4.5/Ø3.2mm | 1 |
| Protection Sleeve | 1 | Cleaning Wire | 1 |
| Drill Sleeve | 1 | Lag Screw Holding Shaft | 1 |
| Protection Drill Sleeve, Ø5.2mm | 1 | Wrench Shaft For Lag Screw | 1 |
| Temporary End Cap For The Lag Screw | 1 | Proximal Aiming Arm | 1 |
| Obturator | 1 | Distal Targeting Device For Long Nail | 1 |
| Drill Bit, Ø5.2mm | 1 | Targeting Device Nut For Long Nail | 1 |
| Flat Drill With T-Handle | 1 | Distal Outrigger | 1 |
| Proximal Reamer | 1 | Distal Outrigger Nut For Long Nail | 1 |
| Awl | 1 | U-Shaped Stabilizing Spacer | 1 |
| Impactor | 1 | Location Shaft | 1 |
| Quick Connection T-Handle | 1 | Slotted Hammer | 1 |
| Ratchet Wrench For Nut, Hexagonal | 1 | Handle Connecting Nut | 1 |
| Location Sleeve | 1 | Instrument Tray | 1 |
A medical device company founded in 1994, is now one of the largest designers, manufacturers, and suppliers of orthopedic implants and instruments. We have over 60,000 square meters of workshop. We are long term instrument contract manufacturer of USA top orthopedic companies. Our own brand product lines include traumatology, spinal fixation system and surgical instrument, covering products such as femoral nail, titanium plates and screws, pedicle screw with rods, PEEK cage, balloon kyphoplasty for spine fracture and other instrument sets, already sell in Europe, Latin America, the Middle East and Asia.
Normally we send through courier, or post upon request from clients.
Yes, we are an ISO 9001:2008 and EN ISO 13485:2012 Certified Company. We have CE mark for many of our products.
We expect your minimum orders to be at least US$1000. However, we understand that customers need to place smaller samples orders in the beginning in order to test market our products. Samples against cost are available on request.
Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.
Generally, we have stock for every listed products, which were produced monthly. But it depends on our sales condition. Better to ask our sales team for accurate inventory information.
Yes, we are a designer and manufacturer of orthopedic implants and surgical instruments. We can handle requirements from orthopedic firms globally, producing quality custom specifications upon request.
